Yealink SIP-T2 Series

Setting Up Your System
71
Procedure
VLAN can be configured using the following methods.
Central
Provisioning
(Configuration File)
<y0000000000xx>
.cfg
Configure VLAN for the Internet port and PC
port manually.
Parameters:
static.network.vlan.internet_port_enable
static.network.vlan.internet_port_vid
static.network.vlan.internet_port_priority
static.network.vlan.pc_port_enable
static.network.vlan.pc_port_vid
static.network.vlan.pc_port_priority
Web User Interface
Configure VLAN for the Internet port and PC
port manually.
Navigate to:
http://<phoneIPAddress>/servlet?p=network
-adv&q=load
Phone User Interface
Configure VLAN for the Internet port and PC
port manually.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
static.network.vlan.internet_port_enable
0 or 1
0
Description:
Enables or disables VLAN for the Internet port.
0-Disabled
1-Enabled
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Advanced->VLAN->WAN Port->Active
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->VLAN->WAN Port->VLAN
Status
static.network.vlan.internet_port_vid
Integer from 1 to
4094
1