Yealink SIP-T2 Series User Manual

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
72
Parameters
Permitted Values
Default
Description:
Configures VLAN ID for the Internet port.
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Advanced->VLAN->WAN Port->VID (1-4094)
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->VLAN->WAN Port->VID
Number
static.network.vlan.internet_port_priority
Integer from 0 to 7
0
Description:
Configures VLAN priority for the Internet port.
7 is the highest priority, 0 is the lowest priority.
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Advanced->VLAN->WAN Port->Priority
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->VLAN->WAN Port->Priority
static.network.vlan.pc_port_enable
0 or 1
0
Description:
Enables or disables VLAN for the PC port.
0-Disabled
1-Enabled
Note: It works only if the value of the parameter “static.network.pc_port.enable” is set to 1
(Auto Negotiation). If you change this parameter, the IP phone will reboot to make the
change take effect.
Web User Interface:
Network->Advanced->VLAN->PC Port->Active
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->VLAN->PC Port->VLAN Status
static.network.vlan.pc_port_vid
Integer from 1 to
1

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English