How to reset my Yealink SIP-T2 to custom factory configurations?
To reset your Yealink IP Phone to custom factory configurations: * Click on Settings->Configuration. * Click Browse to locate the custom factory configuration file from your local system. * Click Import.
Why doesn’t my Yealink SIP-T2 IP Phone upgrade firmware successfully?
If your Yealink IP Phone isn't upgrading firmware, check these points: * Make sure the target firmware version is different from the current one. * Verify the target firmware is compatible with your specific IP phone model. * Ensure neither the current nor the target firmware is protected. * Confirm the phone has power and a stable network connection during the upgrade. * Avoid closing or refreshing the web browser if upgrading via the web user interface.
How to solve the IP conflict problem on my Yealink SIP-T2 IP Phone?
To resolve an IP conflict on your Yealink IP Phone: * Try assigning a different available IP address to the phone. * Check the network configuration through the phone's user interface: go to Menu->Advanced (default password: admin) ->Network->WAN Port->IPv4 (or IPv6). If Static IP is selected, change it to DHCP.
What to do if my Yealink IP Phone LCD screen is blank?
If the LCD screen on your Yealink IP Phone is blank, try these steps: * Ensure the phone is properly plugged into a functional AC outlet. * Make sure the phone is plugged into a socket controlled by a switch that is turned on. * If using a power strip, plug the phone directly into a wall outlet. * If your phone uses PoE, verify you're using a PoE-compliant switch or hub.
Why won't my Yealink SIP-T2 upgrade its firmware?
To troubleshoot a failed firmware upgrade on your Yealink IP phone, ensure that the target firmware is different from the current firmware and is compatible with your phone model. Also, make sure that neither the current nor the target firmware is protected. During the upgrade, ensure that the power is on, the network is available, and the web browser remains open and is not refreshed.
Why won't my Yealink SIP-T2 turn on?
If your Yealink IP phone has no power, try rebooting it first. If that doesn't work, replace the power adapter.
Why is my Yealink SIP-T2 IP Phone not getting an IP address?
If your Yealink IP phone is not getting an IP address, make sure the Ethernet cable is securely plugged into the Internet port and is not damaged. Also, verify that the IP address and related network parameters are set correctly. Confirm that your network switch or hub is working and that the Wi-Fi feature is disabled.
Why doesn't my Yealink SIP-T2 IP Phone get an IP address?
If your Yealink IP phone isn't getting an IP address, check the following: * Make sure the Ethernet cable is securely plugged into the Internet port on the phone. * Verify the Ethernet cable isn't damaged. * Confirm that the IP address and related network parameters are correctly set. * Ensure your network switch or hub is working. * Make sure the Wi-Fi feature is disabled.
Why does my Yealink SIP-T2 IP Phone display “No Service”?
If your Yealink IP phone displays “No Service”, ensure that an account is actively registered on the IP phone at the path Menu->Status->Accounts and that the SIP account parameters have been configured correctly.
What to do if LCD screen is black, but the keypad is usable on my Yealink IP Phone?
General| Audio Codecs | G.722, G.711 |
|---|---|
| Headset Jack | RJ9 |
| Features | Call hold, Call waiting, Call transfer, Call forward, mute, redial |
| Protocols Supported | SIP, TCP/IP, UDP, RTP, RTCP, DHCP, DNS, NTP, HTTP, HTTPS |
| Weight | 0.8 kg (1.76 lbs) |
| Operating Humidity | 10% to 90% (non-condensing) |
To Next Page
