4-16
IM AQ7280-01EN
Performing Macro Bending
1.
From the top menu, select OTDR.
2.
Press the Advanced Analysis soft key and then the Macro Bending soft key to display the
Macro Bending menu.
Traces 1 to 4
Load, clear, and move
traces.
Performs macro bending
Load waveform data.
The file operation screen will appear
(see section 6.3).
Clears the displayed traces
Clears the display of the loaded
traces
Moves the trace up
Moves the display position of
the loaded trace up.
Moves the trace down
Moves the display position of
the loaded trace down.
Loading Waveform Data
Load waveforms of at least two wavelengths. The type of file that you can load is SOR.
4.1 Analyzing Waveforms
To Next Page
Loading...
