YOKOGAWA AQ7280 User Manual

6-13
IM AQ7280-01EN
File Operation and Printing
1
2
3
4
5
6
7
8
Index
6.5 Renaming Files
CAUTION
Do not remove a USB memory device or turn off the power when the USB memory access
indicator is blinking or when data is being saved or loaded from internal memory. Doing so
may damage the storage medium (USB memory or internal memory) or corrupt its data.
French
ATTENTION
N'enlevez pas un dispositif de mémoire USB et ne coupez pas l'alimentation électrique
lorsque l'indicateur d'accès à la mémoire USB clignote ou lorsque les données sont en train
d'être enregistrées ou chargées à partir d'une mémoire interne. Vous risqueriez
d'endommager le support de stockage (mémoire USB ou mémoire interne) ou les données
qu'il contient.
Procedure
Renaming a File
Press FILE to display the following screen.
Set the action (Rename).
Select the target drive
(Int. Memory, USB Memory 1,
USB Memory 2, SD Card).
Using the rotary knob and ENTER, select the
file to rename.
A check mark appears next to the selected file.
To clear the selection, press ENTER again.
Enter a new file name.
A character input dialog box will open.
Enter the file name and extension by following the
procedure provided in “Entering Character Strings”
in the Getting Started Guide, IM AQ7280-02EN.
Tapping Enter in the character input dialog box
changes the file name to the name you entered.
Note
Do not select more than one file (check mark).

YOKOGAWA AQ7280 Specifications

General

Brand	YOKOGAWA
Model	AQ7280
Category	Measuring Instruments
Language	English