YOKOGAWA AQ7280 User Manual

6-11
IM AQ7280-01EN
File Operation and Printing
1
2
3
4
5
6
7
8
Index
6.4 Copying and Deleting Files
CAUTION
Do not remove a USB memory device or turn off the power when the USB memory access
indicator is blinking or when data is being saved or loaded from internal memory. Doing so
may damage the storage medium (USB memory or internal memory) or corrupt its data.
French
ATTENTION
N'enlevez pas un dispositif de mémoire USB et ne coupez pas l'alimentation électrique
lorsque l'indicateur d'accès à la mémoire USB clignote ou lorsque les données sont en train
d'être enregistrées ou chargées à partir d'une mémoire interne. Vous risqueriez
d'endommager le support de stockage (mémoire USB ou mémoire interne) ou les données
qu'il contient.
Procedure
Copying and Deleting Files
Press FILE to display the following screen.
Set the action
(Delete, Copy).
Select the target drive
(copy source, delete)
(
Int. Memory, USB Memory 1,
USB Memory 2, SD Card).
Execute Select All.
Delete or set the copy destination.
This soft key is Delete or Dest. Folder depending on
the Action setting.
Pressing the Dest. Folder
soft key displays a screen
for selecting the copy destination folder.
After selecting a folder on this screen, pressing the
Copy soft key displays a confirmation message for
executing the operation. Tap
OK
to execute it.
Using the rotary knob and ENTER, select the
file to delete or copy.
A check mark appears next to the selected file.
To clear the selection, press ENTER again.

YOKOGAWA AQ7280 Specifications

General

Brand	YOKOGAWA
Model	AQ7280
Category	Measuring Instruments
Language	English