YOKOGAWA AQ7280 - Marker Info; Scale Display; Event Auto Zoom; Db Decimal;Distance Decimal

3-6
IM AQ7280-01EN
Marker Info.
You can display the distance from the measurement reference point to each marker on the
waveform display area.
OFF: Marker information is not displayed.
ON: Marker information is displayed.
Marker information
Scale Display
You can display the scale values on the vertical and horizontal axes.
OFF: Scale values are not displayed.
ON: Scale values are displayed.
Horizontal scale value
Vertical scale value
Event Auto Zoom
When events have been detected, you can zoom in on the event at the cursor position or the
selected event. Each time that you select a different event, the zoom ratio of the vertical and
horizontal axes is adjusted automatically. For details about event editing, see section 4.2.
dB Decimal
You can select the number of decimal places of the dB display.
**.*: 1 decimal place
**.**: 2 decimal places
**.***: 3 decimal places
Distance Decimal
You can select the number of decimal places of the distance display.
**.***: 3 decimal places
**.****: 4 decimal places
**.*****: 5 decimal places
3.2 Configuring the Waveform Display