YOKOGAWA AQ7280 - Waveform Expand Mode; Index

3-3
IM AQ7280-01EN
Optical Pulse Waveform Display
1
2
3
4
5
6
7
8
Index
Configuring the Waveform Display
Press the OTDR Setup soft key to display the following screen.
When the screen is scrolled
Wavelength area expanded display (OFF, ON).
Marker display (Marker, Line)
Set the event fix mode.
See section 4.2.
Set the backscatter level base (1µs, 1ns).
Ghost cursor display (OFF, ON)
Approximated line display (OFF, ON)
Cursor dB value display (OFF, ON)
Cursor display (CROSS(+), LINE( ¦))
Marker information display (OFF, ON)
Scale display (OFF, ON)
Event auto zoom display (OFF, ON)
dB decimal places (**.*, **.**, **.***)
Distance decimal places (**.*, **.**, **.***)
Label display (OFF, ON)
Set the calculation method for total loss
(Cumul-loss, Loss between S and E).
Set the calculation method for total return
loss (Include END, Exclude END).
Set the file list (File Name, File Name + Label).
Set the distance unit (km, mi(mile), kf(kfeet)).
Waveform Expand Mode
You can reduce the measurement condition display area and the display area for measured values
of the marker section and expand the waveform display area.
OFF: The waveform display area is not expanded.
ON: The waveform display area is expanded.
3.2 Configuring the Waveform Display