YOKOGAWA AQ7280 - 8.5 Updating the Firmware

8-8
IM AQ7280-01EN
8.5 Updating the Firmware
Procedure
Firmware Update Screen
On the top menu, press SETUP and then the Firmware Update soft key to display the following
screen.
Set the save destination drive
of the firmware update file
(Int. Memory, USB Memory 1,
USB Memory 2, SD Card).
Executes firmware updating
Using the rotary knob and ENTER,
select the firmware update file.
Explanation
• Firmware update files are YMC files (e.g., AQ7280.YMC).
• If necessary, you can change the file name, but on the extension. For details, see section 6.5.
• When updating the firmware, connect the AC adapter to the AQ7280.
• When a firmware update completes successfully, the AQ7280 will restart automatically.
• If it fails, an error message will appear.
Check the format and version of the firmware update file. For the procedure, see section 8.3.