4-18
IM AQ7280-01EN
Event Type
The type of each event is displayed with the following symbols.
: Positive splice loss
: Negative splice loss
: Reflection
: Bending loss (macro bending)
: Splitter insertion loss
Section Group Index and Event Fix Type
• Section Group Index
If Event Fix Mode is set to off as described later in “Fix event positions,” the section group index
is displayed.
• Event Fix Type
If Event Fix Mode is set to Append Mode (Mode 1) or Master Mode (Mode 2) as described later
in “Fix event positions,” the event fix type is displayed.
NEW: Displayed for events that are detected after Event Fix Mode is set to Append Mode (Mode 1).
Event fix type display
Rotary Knob Feature
You can select the operation that occurs when you turn the rotary knob from the following.
Cursor: The cursor moves continuously.
Event: The cursor moves directly between detected events.
4.2 Analyzing Events
To Next Page
Loading...
