5-6
IM AQ7280-01EN
Skip
When Skip is selected, the corresponding core is not measured. By specifying Skip on cores that do
not need to be measured, you can save time.
Saving the Data
You can save up to three sets of data in the save area of the specified core number. To confirm
whether the optical fiber cable installation has any effect, you can save the measured values before
and after the installation for comparison later.
For details on saving data to files, see section 6.3.
Deleting Optical Power Measurement Data
You can delete data from the save areas for each core number individually or all cores at once.
Press the Delete Data soft key to display the Delete Data menu.
Deletes the No. 1 data of the selected core
Collectively deletes the No. 1, 2, and 3 data
of the selected core
Collectively deletes all the data of all cores
When you delete data, the screen returns to the Save Data
menu after the data is deleted.
Deletes the No. 2 data of the selected core
Deletes the No. 3 data of the selected core
5.2 Measuring Optical Power (OPM, /PC option)
To Next Page
Loading...
Need help?
General
