YOKOGAWA AQ7280 - Previewing Measured Results

2-43
IM AQ7280-01EN
Optical Pulse Measurement (OTDR)
1
2
3
4
5
6
7
8
Index
Previewing Measured Results
Using the arrow keys or the rotary knob, move the cursor to a core number cell with a pass/fail
judgment result indication on the main view screen. The preview area at the bottom of the screen
displays the measurement conditions, measurement date, and the measurement result waveform of
the selected core number. For details on pass/fail judgment, see page 2-12.
Optical Pulse Measurement Results
• When Pass Fail Judgement Is Set to OFF
Check marks appear next to the wavelengths for which measured data is saved.
Check marks
Preview waveform
• When Pass Fail Judgement Is Set to ON
Judgment result marks appear next to the wavelengths for which measured data is saved.
Judgment result marks
Preview waveform
Judgment result display
Judgment result mark description
Count values
Note
NoJudge display
If an MPJ file of an older version is loaded, the file may contain core information whose event analysis has
not been executed even when the fault event display is turned on. If this occurs, you can turn off the fault
event setting once and then turn it back on so that pass/fail judgment is executed again on the measured
data and pass or fail is indicated.
Optical Power Measurement Results and Fiber End Face Observation Results
The optical power of the measured wavelength is displayed. An image data is displayed for the
observation result the fiber end face.
Preview imageOptical power values
2.8 Performing Multi-Core Fiber Measurement