6-10
IM AQ7280-01EN
Label
When you are using the OTDR, OTDR Smart Mapper, Fault Locator, or power meter feature, you can
specify the following items. If you save waveform data measured from an optical pulse to a file in SOR
format, the following label information is also saved.
Item Description
Company name Up to 36 characters
Name Up to 36 characters
Cable ID Up to 36 characters
Fiber ID Up to 36 characters
Fiber type 652:Conventional SMF General purpose single mode
653:Dispersion Shifted SMF Dispersion shifted
654:Cut-Off Shifted SMF Cut-off shifted
655:Non-Zero Dispersion Shifted SMF Non-zero, dispersion shifted, single mode
656:NZDSF for Wideband Transport Wideband non-zero, dispersion shifted, single
mode
657:Bend Optimized SMF Bend optimized single mode
651:Multi-Mode Fiber Multi mode
Cable code Up to 36 characters
Start position Up to 36 characters
End position Up to 36 characters
Current data flag Shows the operation state.
BUILT (BC), REPAIRED (RC), OTHER (OT), and CURRENT (CC)
Direction* Shows from which side the optical fiber cable connecting the start position (A) and stop
position (B) was measured.
A -> B Measured with the AQ7280 connected to the start position (A)
B -> A Measured with the AQ7280 connected to the stop position (B)
* This is available only for multi-core fiber measurement. It is not displayed for other functions.
6.3 Saving and Loading Data
To Next Page
Loading...
Need help?
General
