6-21
IM AQ7280-01EN
File Operation and Printing
6
• Report Format
Press the Report Format soft key to display the following screen.
Report format (1Trace, 2Trace)
Select the number of waveforms to
show in a single page.
Order (File Name, Date, ID)
Selects how to decide the order in
which the specified files are exported
to PDF.
ID Position (Top, Bottom)
Defines the position of the ID number
set on the File Name Setup screen in
section 6.3. Files with ID numbers set
to positions other than top or bottom
cannot be exported to PDF in the
correct order.
Items to show in the event list
If the report format is 2Trace, up to five items can be displayed in the event list.
Set the items you want to show to On. If five items are On, other items cannot be set to On.
Sort Order (A -> Z, Z -> A)
Selects the output sort order.
Note
• For File Report, SOR and SMP files can be exported to PDF.
• You cannot view PDF files on the AQ7280. Use a PC for this purpose. To view the PDF files, you need
Adobe Reader 5.0 or later.
• If you execute File Report from the top screen, you cannot use the Action soft key.
• When waveform data (SOR format) saved without performing event analysis is exported to PDF, event
analysis is performed automatically on the AQ7280, and an event list is displayed.
6.8 Creating Reports of Waveform Data as PDF Data
To Next Page
Loading...
