8-3
IM WT18
O
1E-02EN
Setting Scheduled Times for Real-Time Integration (Real-time
Control)
Press the Real-time Control soft key to display the following screen.
The Real-time Control soft key is displayed when Mode is set to R-Normal or R-Continuous.
Set the scheduled start and stop times
(Year/month/day, 00 hours : 00
minutes : 00 seconds to 23 hours : 59
minutes : 59 seconds).
When Independent Integration Is Off
When Independent Integration Is On
Select the schedule setup method
(Each, All).
When you select Each, you can set the
schedule for each input element.
Scheduled integration start time
Scheduled integration stop time
Sets the scheduled integration start time to
the current time
Copies the scheduled integration start time to the
scheduled integration stop time
Setting the Watt-Hour Integration Method for Each Polarity (WP±
Type)
Press the WP± Type soft key to display the following screen.
Set the integration method (Charge/Discharge, Sold/Bought).
Select the integration method setup method (Each, All).
When you select Each, you can set the integration method for
each input element.
8.2 Setting Integration Conditions
To Next Page
Loading...
Need help?
General
