8-4
IM WT18
O
1E-02EN
Setting the Current Mode for Current Integration (q Mode)
Press the q Mode soft key to display the following screen.
Set the current mode (rms, mean, dc, r-mean, ac).
Select the current mode setup method (Each, All).
When you select Each, you can set the current mode for each
input element.
Setting the Rated Time of Integrated D/A Output (D/A Output
Rated Time, /DA option)
Press the D/A Output Rated Time soft key to display the following screen.
Set the rated time of integrated D/A output
(00000 hours : 00 minutes : 00 seconds to 10000 hours :
00 minutes : 00 seconds).
8.2 Setting Integration Conditions
To Next Page
Loading...
