13185L-002 Rev. A 1/24/06 110XiIIIPlus Maintenance Manual Page 3-3
Troubleshooting Section 3
Cancel Key Self Test
Refer to Figure 3-1. This self test prints a single label that contains a listing of the current
configuration parameters stored in configuration (EEPROM) memory. To perform this self
test, press and hold CANCEL while turning the printer On (l).
The configuration may be changed either temporarily (for specific label formats or ribbon
and label stock) or permanently (by saving the new parameters in EEPROM memory).
Refer to the Users Guide for further details on the printer configuration procedure.
Figure 3-1. Cancel Key Test Sample Labels
To Next Page
Loading...