Zebra DS8108

A - 4 DS8108 Digital Scanner Product Reference Guide
Quick Keypad Emulation N/A N/A Enable 8-6
Simulated Caps Lock N/A N/A Disable 8-7
Caps Lock Override N/A N/A Disable 8-7
Convert Case N/A N/A Do Not Convert 8-8
Function Key Mapping N/A N/A Disable 8-8
FN1 Substitution N/A N/A Disable 8-9
Send Make and Break N/A N/A Send Make and Break Scan
Codes
8-9
User Preferences
Set Default Parameter N/A N/A N/A 9-5
Parameter Bar Code Scanning 236 ECh Enable 9-6
Beep After Good Decode 56 38h Enable 9-6
Beeper Volume 140 8Ch High 9-7
Beeper Tone 145 91h Medium 9-8
Beeper Duration 628 F1h 74h Medium 9-9
Suppress Power Up Beeps 721 F1h D1h Do Not Suppress 9-9
Direct Decode Indicator 859 F2h 5Bh Disable 9-10
Decode Pager Motor 613 F1h 65h Enable 9-11
Decode Pager Motor Duration 626 F1h 72h 150 msec 9-12
Night Mode Trigger 1215 F8h 04h BFh Disable 9-14
Night Mode Toggle N/A N/A N/A 9-14
Low Power Mode 128 80h Disable 9-15
Time Delay to Low Power Mode 146 92h 1 Hour 9-16
Trigger Mode (or Hand-held Trigger
Mode)
138 8Ah Auto Aim 9-18
Hands-free Mode 630 F1h 76h Enable 9-19
Hand-held Decode Aiming Pattern 306 F0h 32h Enable 9-20
Table A-1 Parameter Defaults (Continued)
Parameter
Parameter
Number
1
SSI
Number
2
Default
Page
Number
1. Parameter number decimal values are used for programming via RSM commands.
2. SSI number hex values are used for programming via SSI commands.