Axio Imager 2 OPERATION ZEISS
Operating the motorized microscope via the touchscreen of the TFT display
01/2016 430000-7544-001 147
Each setting can be given an individual name.
• Press the Rename button.
• Enter the name and acknowledge by pressing
the ENTER key on the keyboard.
• Complete this procedure by pressing the OK
button or discard the entry by pressing the
Cancel button.
(2) User Settings tab
This tab allows the password for the user to be
changed.
• Press Change password.
• Enter the old password.
• Enter the new password (at least five
characters).
• Repeat the new password.
• Acknowledge by pressing the OK button on the
numeric pad.
• Accept the change by pressing the OK button
or discard it by pressing the Cancel button.
Fig. 172 Renaming HW Setting
Fig. 173 Microscope -> User -> User
Fig. 174 Changing the password
To Next Page
Loading...
