ZyXEL Communications USG FLEX H Series - Page 228

Chapter 14 Object
USG FLEX H Series User’s Guide
228
Figure 157 Object > Schedule > Edit (One Time)
The following table describes the labels in this screen.
Table 118 Configuration > Object > Schedule > Edit (One Time)
LABEL DESCRIPTION
Configuration
Name Type the name used to refer to the one-time schedule. You may use 2-30 single-byte
characters, including 0-9a-zA-Z, underscores(
_), or dashes (-), but the first character cannot be
a number. This value is case-sensitive.
Description Type a description used to identify the one-time schedule. You may use 1-30 single-byte
characters, including 0-9a-zA-Z’()+,/:=?;!*#@$_%-”
Day Time
Start Specify the year, month, and day when the schedule begins.
• Year - 1900 - 2999
• Month - 1 - 12
• Day - 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
Specify the hour and minute when the schedule begins.
• Hour - 1-12 AM/PM
• Minute - 0 - 59
Stop Specify the year, month, and day when the schedule ends.
• Year - 1900 - 2999
• Month - 1 - 12
• Day - 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
Specify the hour and minute when the schedule ends.
• Hour - 1-12 AM/PM
• Minute - 0 - 59
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to return the screen to its last-saved settings.