ZyXEL Communications USG FLEX H Series - Page 227

Chapter 14 Object
USG FLEX H Series User’s Guide
227
The following table describes the labels in this screen. See Section 14.4.2.1 on page 227 and Section
14.4.2.2 on page 229 for more information as well.
14.4.2.1 The One-Time Schedule Add/Edit Screen
The One-Time Schedule Add/Edit screen allows you to define a one-time schedule or edit an existing
one. To access this screen, go to the Schedule screen (see
Section 14.4.2 on page 226), and click either
the Add icon or an Edit icon in the One Time section.
Table 117 Object > Schedule
LABEL DESCRIPTION
One Time
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to be able to modify the entry’s settings.
Remove To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove
it before doing so.
Reference Select an entry and click Reference to check which settings use the entry.
Name This field displays the name of the schedule, which is used to refer to the schedule.
Start Day /
Time
This field displays the date and time at which the schedule begins.
Stop Day /
Time
This field displays the date and time at which the schedule ends.
Reference This displays the number of times an object reference is used in a profile.
Recurring
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to be able to modify the entry’s settings.
Remove To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove
it before doing so.
Reference Select an entry and click Reference to check which settings use the entry.
Name This field displays the name of the schedule, which is used to refer to the schedule.
Start Time This field displays the time at which the schedule begins.
Stop Time This field displays the time at which the schedule ends.
Reference This displays the number of times an object reference is used in a profile.