ACF5000 FTIR ANALYZER SYSTEM | OI/ACF5000-EN REV. A 97
Saving the reference as an initial reference
Function
After recording the manual reference, it can be saved as an initial reference.
The initial reference serves as the valuation basis for the following reference
recordings. It should only be re-recorded after changes to the FTIR spectro-
meter.
Menu path
Menu → Service/Test → Analyzer Spec. Adjustment →
Basic Adjustment
Display
Procedure
Select FTIR analyzer and in the following menu, press the SET INIT softkey.
To Next Page
Loading...
Need help?
General
