ABB ACS580 Series - Option Slot 1 (Fieldbus Adapter Modules); Wiring the Optional Modules

￭
Option slot 1 (fieldbus adapter modules)
1. Put the module carefully into its position on the control unit.
2. Tighten the mounting screw (CHASSIS) to 0.8 N·m (7 lbf·in). The screw tightens
the connections and grounds the module. This is necessary for fulfilling the
EMC requirements and for correct operation of the module.
1
2
￭
Wiring the optional modules
See the appropriate option module manual or for I/O options the appropriate
chapter in this manual.
166 Electrical installation – Global (IEC)