ABB ACS580 Series - IP21 (UL Type 1), IP55 (UL Type 12)

8. Put the tabs at the top of the front cover in their counterparts on the housing
and then press at the bottom (8a) and tighten the retaining screws (8b).
4 5 6
4a
4b
4c
3×M5 (#10)
7
8
7a
7b
7b
8a
8b
IP21 (UL Type 1), IP55 (UL Type 12)
9. Position the drive onto the lower bolts (9a) on the wall to support the weight
of the drive. Rotate drive to the wall and place drive over the upper bolts (9b).
Lift the drive with another person or with a lifting device as it is heavy. Tighten
the bolts in the wall securely (9c).
10. Tighten the two remaining bolts securely.
10
9
9b
9c
9c
×2
×2
9a
Note: Install the hood to UL Type 12 drives after you have installed the drive
electrically and reinstalled covers, see Installing UL Type 12 hood (page 212).
90 Mechanical installation
4