ABB ACS580 Series - Type Designation Key

1
3
4
5
6
7
8
9
10
11
2
1
2
3
Note: P
n
is not shown in UL (NEC) drive labels
Type designation key
The type designation contains information on the specifications and configuration
of the drive. You find the type designation on the type designation label attached
to the drive. The first digits from the left express the basic configuration, for
example, ACS580-01-12A7-4. The optional selections are given after that, separated
by plus signs, for example, +L501. The main selections are described below. Not
all selections are available for all types.
DescriptionCode
Basic codes
Product seriesACS580
When no options are selected: Wall mounted, IP21 (UL Type 1), ACS-AP-S As-
sistant control panel, choke, EMC C2 filter (internal EMC filter), safe torque
off, braking chopper in frames R1, R2, R3, coated boards, cable entry from
the bottom, cable box or the conduit plate with cable entries, quick installation
and start-up guide (multilingual kit).
01
54 Operation principle and hardware description