ABB ACS580 Series - Control Panel Door Mounting Kits; Type Designation Label

￭
Control panel door mounting kits
You can use a mounting platform to install the control panel on the cabinet door.
Mounting platforms for control panels are available as options from ABB. For more
information, see
Code (English)Manual
3AUA0000100140DPMP-01 mounting platform for control panels installation guide
3AUA0000136205DPMP-02/03 mounting platform for control panels installation guide
3AXD50000308484DPMP-04 and DPMP-05 mounting platform for control panels installation
guide
3AXD50000289561DPMP-06 / 07 mounting platform for control panels installation guide
Type designation label
The type designation label includes IEC and UL (NEC) ratings, appropriate markings
and the type designation and serial number, which allow identification of each
drive. The type designation label is located on the left side of the drive, see section
Locations of the labels on the drive (page 53). An example label is shown below.
1
3
4
5
6
7
8
9
10
11
2
DescriptionNo.
Type designation, see section Type designation key (page 54).
1
Contact address2
Frame (size) (New design of frame R4 types are marked as R4 v2)3
Type of the drive, for example, with Air cooling or Liquid cooling, and so on.4
IEC: Icc (Rated conditional short-circuit current) = 65 kA,5
UL (NEC): SCCR (Maximum prospective short circuit current rating) = 100 kA
Degree of protection6
52 Operation principle and hardware description