ABB ACS580 Series - Losses, Cooling Data and Noise; Cooling Air Flow, Heat Dissipation and Noise for Stand-Alone Drives; IEC - IP21 and IP55 (UL Type 1 and 12)

Free space, IP66 (UL Type 4X)
Vertical mounting side by side
1)
Vertical mounting stand aloneWeight
BesideBelowAboveBesideBelowAbove
inmminmminmminmminmminmmlbkg
007.92007.92005.91502.0502.6652611.8R1
007.92007.92005.91502.0502.6653214.5R2
007.92007.92005.91502.0502.6655826.4R3
1)
Without free space on the sides.
Free space, IP66 (UL Type 4X), horizontal mountingFrame
size
BelowAboveCable box sideFan side
inmminmminmminmm
7.92001.2302.0505.9150R1
7.92001.2302.0505.9150R2
7.92001.2302.0507.9200R3
Losses, cooling data and noise
The air flow direction is from bottom to top.
￭
Cooling air flow, heat dissipation and noise for stand-alone drives
This table shows typical heat loss values, required air flow and noise at the nominal
ratings of the drive. The heat loss values can vary depending on voltage, cable
conditions, motor efficiency and power factor. To obtain more accurate values for
given conditions, use ABB DriveSize tool
(http://new.abb.com/drives/software-tools/drivesize).
IEC - IP21 and IP55 (UL Type 1 and 12)
Frame sizeNoiseAir flow
Typical heat dissipa-
tion
1)
ACS580-
01-…
BTU/hW dB(A)CFMm
3
/h
3-phase U
n
= 230 V
R15925431815304A7-2
R15925432467206A7-2
R15925432808207A6-2
318 Technical data