Top cushion4
Bottom cushion5
Bottom cushion6
Top cushion7
Note: Hood included with option +B056
(IP55/UL Type 12) in North America
Note: Hardware and firmware manuals can
be ordered as a separate kit, see Manual kit
ordering codes (page 57)
Drive1
Cardboard box. Mounting template in
the cardboard box.
2
Option support:3
• Europe: Quick installation and start-
up guide kit (6 languages)
• North America: Quick installation and
start-up guide
• Multilingual residual voltage warning
stickers
• Control panel selected in the order
(in a separate package) in the option
box
• North America: Control panel factory
installed
• Possible options in separate pack-
ages, if they have been ordered with
a plus code, such as for example
+K490 (FEIP-21 Two-port Ether-
Net/IP adapter module) in the option
box
• North America: Options may be
ordered as factory installed.
To unpack:
• Open box (2)
• Remove option support (3)
• Remove top cushions (4,7)
• Lift the drive (1) and remove bottom cushions (5,6).
Recycle the package material according to local regulations.
Mechanical installation 75
To Next Page
Loading...
