• North America: Quick installation and
start-up guide
• Multilingual residual voltage warning
stickers
Control panel selected in the order (in
a separate package) in the option tray
North America: Control panel factory
installed
10
Possible options in separate packages,
if they have been ordered with a plus
code, such as for example +K490 (FEIP-
21 Two-port EtherNet/IP adapter mod-
ule) in the option box.
North America: Options may be ordered
as factory installed
11
Mounting template on top of the option
tray
12
Note: Hood included with option +B056
(IP55/UL Type 12) in North America
Note: Hardware and firmware manuals can
be ordered as a separate kit, see Manual kit
ordering codes (page 57)
Cable box. Power and control cable
grounding shelves in a plastic bag, as-
sembly drawing.
Note: The cable box is mounted to the
IP55 drive module frame at the factory.
1
Drive with factory installed options2
Cardboard box3
Straps4
VCI bag for protecting against corro-
sion
5
Pallet6
Stopper7
Option tray8
In the option tray9
• Europe: Quick installation and start-
up guide kit (6 languages)
To unpack:
• Cut the straps (4).
• Remove the cardboard box (3) and option tray (8).
• Remove the VCI bag (5).
• Attach lifting hooks to the lifting eyes of the drive (see the figure in section
Safety (page 59)).
• Lift the drive with a hoist.
Recycle the package material according to local regulations.
Mechanical installation 83
To Next Page
Loading...
