Illustration/NoteAction
xx1400001585
Check that no pipe has been damaged, and
that the grease is arriving to each block
and at the pinion lube tube.
3
Checking the performance
The automatic lubrication system should be checked that it can work properly. For
information about checking Memolub function, see Test the grease pump
MEMOLUB
®
(verify function) on page 143.
Product manual - IRBT 2005 161
3HAC051130-001 Revision: F
© Copyright 2015 - 2018 ABB. All rights reserved.
3 Maintenance
3.4.1 Inspecting the automatic lubrication system
Continued
To Next Page
Loading...
