Secondary Codes: 05, 06, O7
The film recorder used the image parameter information it received and
calculated an illegal vertical video address.
• 05 indicates that the initial vertical address is greater than the al-
lowed maximum.
• 06 indicates that the calculated end address is less than the allowed
minimum.
• 07 indicates that the calculated end address is greater than the
start address.
For all three errors:
• Register pair H and L contain the vertical start address
• D and E contain the end address
• B and C contain the number of lines per scan
Secondary Code: O8
A nonexistent internal look-up table was requested.
Secondary Code: O9
The film recorder received an illegal intensity assignment.
Secondary Code: OA
The calculated horizontal endpoint was no longer within the digital
image map after the image rotated by 90 degrees.
• Register HL contains the horizontal start address.
• DE contains the horizontal end address.
• BC contains the horizontal line length.
Appendix • A-15
To Next Page
