Setting Contrast Values
To adjust the contrast, perform the following steps:
Step 1: Press MENU once, then NEXT or PREVIOUS until the display
reads SET CONTRAST SELECT FUNCTION.
Step 2: Press SELECT to display the current contrast setting for red.
Selectable values range from 20 (minimum contrast) to 255
(maximum contrast). Press NEXT or PREVIOUS to scroll
through your available choices. Press SELECT again to
choose a value.
Step 3: Press NEXT to view and adjust the green and blue settings
as above.
Step 4: After you change the values, force a calibration. The new val-
ues do not take effect until the film recorder recalibrates.
Step 5: After selecting values for all three colors, press MENU to re-
turn to the Ready state.
Note: To maintain a balanced grey around box 12,
you may need to re-adjust the brightness value
after changing the contrast value.
6-10 • PCR II Plus User Guide
To Next Page
Loading...
