Keypad Controls
There are four keys on the keypad. They are identified by the letters
A, B, C, and D. Press different key combinations to perform different
operations.
In the illustrations that accompany the descriptions below, the
grayed out boxes represent the key or keys that you need to press.
A: Jog Forward—Advances the film by one frame. If you
hold down key A, the module continues to advance film
until you release the key.
B: Mark—Advances 1.5 frames, marks the film, then ad-
vances another 1.5 frames.
C: Auto-mark—Advances 1.5 frames, marks the film, then
advances another 1.5 frames. Automatically repeats the
mark operation again after 36 frames have been im-
aged. Continues until disabled. To disable auto-mark,
press C again.
D: Format—Not implemented.
Press D and another key at the same time to perform
additional functions.
Note: Pressing D alone has no effect.
4 • PCR II Plus 35mm Bulk Load Camera Module
To Next Page
