AGFA PCR II Plus - Function Selections

Function Selections
This section lists and defines the selections in the user menu.
Note: Each time you access PCR II Plus function
menus, the LCD display starts with the last se-
lected function. This makes it easier to change
prior settings without scrolling through the entire
menu set.
READY
AG100PLS 4K1
Identifies the film type, imaging resolution mode and frame number.
LOAD FILM
SELECT FUNCTION
Advances a new roll of film and resets the frame counter to # 1.
UNLOAD FILM
SELECT FUNCTION
Resets the frame to counter #0.
ADVANCE FILM
SELECT FUNCTION
Advances the film one or more frames.
SET FRAME COUNT #
SELECT FUNCTION
Enables you to set the frame counter to any number between 0 and
255 without advancing the film.
SET FILM TYPE
SELECT FUNCTION
Enables you to select one of the supported film types or the USER FILM
compensation values for a specific module. When you make a selec-
tion, the PCR II Plus loads the appropriate compensation values and
performs a calibration.
3-6 • PCR II Plus User Guide