Introduction
The PCR II Plus provides controls that enable you to change the color
balance
of
your
output.
This means
that
you can
fine
tune
the
film
re-
corder
for
optimum
results
with
the
specific
combination
of
film,
pro-
cessing chemistry, and, where applicable, printing paper, that you are
using.
This chapter describes these controls and provides information about
how to use them. It covers the following topics:
• Overview of the process of adjusting the color balance.
• How to expose test images.
• Brightness values and how to adjust them.
• Contrast values and how to adjust them.
• Repeat values and how to adjust them.
• General guidelines for adjusting the color balance.
• Special guidelines for using color print film with the PCR II Plus.
Color Balance • 6-1
To Next Page
Loading...
