AGFA PCR II Plus - Unloading the Film

Unloading the Film
Step 1: Slide both back lock release latches outward.
Step 2: Open the camera back and lift the film cartridge up and out
of the camera chamber.
Step 3: Remove the film. Make sure that the film does not unroll or
become loose.
Step 4: Remove the empty spool from the film cartridge, replace it on
the right-hand side so that it becomes the take-up spool.
When you open the back cover, the exposure counter automatically re-
turns to 'S' (Start). If anything other than 'S' appears in the exposure
counter, it indicates there is film in the cassette. Always check the ex-
posure counter before you open the back cover.
PCR II Plus 120/220 Camera Module • 11