Setting Brightness
To adjust the brightness:
Step 1: Press MENU once, then press NEXT or PREVIOUS until the
display reads SET BRIGHTNESS SELECT FUNCTION.
Step 2: Press SELECT to display the current brightness setting for
red. Selectable values range from 20 (produces a brighter
shade) to 255 (produces a darker shade). Press NEXT or
PREVIOUS to scroll through your available choices. Press
SELECT again to choose a value.
Step 3: Press NEXT to view and adjust the green and blue settings
as above.
Step 4: After you change the values, force a calibration. The new val-
ues do not take effect until the film recorder recalibrates.
Step 5: After selecting values for all three colors, press MENU to re-
turn to the Ready state.
6-8 • PCR II Plus User Guide
To Next Page
Loading...
