AGFA PCR II Plus - Loading Film

Loading Film
After you load film into the 35mm camera module, follow this proce-
dure to execute a LOAD FILM command:
Step 1: Press MENU once, then press PREVIOUS or NEXT until the
message window displays LOAD FILM SELECT FUNCTION.
Note: The LOAD FILM command appears only
after you have selected the UNLOAD FILM func-
tion.
Step 2: Press SELECT to execute the LOAD FILM command. This
command does the following:
• Advances the film to position # 1.
• Resets the PCR II Plus frame counter to one (#1).
• Clears the end-of-film condition.
Step 3: Press MENU once to return to the ready condition.
Procedures for inserting film into a camera back are described in the
camera module sections at the end of this guide.
4-2 • PCR II Plus User Guide