AGFA PCR II Plus - Setting the Pacing Value; Guidelines for Selecting Pacing Values

Setting the Pacing Value
Step 1: Press MENU once then press PREVIOUS or NEXT repeatedly
until the message window displays SET PACING SELECT
FUNCTION.
Step 2: Press SELECT to enter the pacing submenu. The display
shows PACING HS SELECT VALUE or PACING nnn where
nnn is a number between three and 255. PACING HS has a
pacing value of zero.
Step 3: Press NEXT to increase the pacing number to a maximum of
255, PREVIOUS to lower the pacing number.
Step 4: Press SELECT to choose a pacing value and exit the pacing
submenu.
Step 5: Press MENU once to return to the Ready menu.
Guidelines for Selecting Pacing Values
• The pacing values you select vary with the speed of the equipment
you use. With some rasterizers, you may need to use large pacing
values.
• When imaging very complex graphics with photo drop-ins or large
amounts of text, you may obtain better results by using a pacing
value of seven to fifteen. This will have a minimal impact on the
total imaging time.
• When using Mac Conductor, set the Pacing value in the FILM RE-
CORDER PREFERENCES dialog. Mac Conductor ignores the pac-
ing value set at the film recorder.
Image Control * 5-5