Guidelines for SCSI Connection
Caution:
Turn off the host computer and the film recorder
before you connect or disconnect the SCSI cables.
• The total length of SCSI cable across the entire chain should be 15
feet (4.57 meters) or less. When measuring this maximum length,
include all internal SCSI cables in the host computer and periph-
eral devices.
• Make sure that both ends of a SCSI chain are terminated. See the
section Internal Termination in this chapter.
• Fasten the interlocking wire clips or screws on the ends of all SCSI
cables. Provide adequate strain relief wherever cables connect into
the devices.
• You can connect the SCSI cable to either SCSI port on the PCR II
Plus rear panel.
Installation • 2-7
To Next Page
Loading...
