Unloading a 35mm Cassette
Follow this procedure to unload a 35mm cassette:
Step 1: Turn off the drive sprocket motor. There are two ways to do
this:
• You can turn off the power to the camera.
• You can advance the film to the end of the roll. This au-
tomatically shuts off the drive sprocket motor.
Step 2: With the motor off, manually rewind the film back into the
cassette. Follow the rotation direction marked on the camera
door.
Caution:
When unloading hand-rolled film cassettes, take
care that the cassette does not come apart.
14 • PCR II Plus 35mm Bulk Load Camera Module
To Previous Page
