AGFA PCR II Plus - Using Standard 35 Mm Cassettes; Loading a 35 Mm Cassette

Using Standard 35mm Cassettes
This section describes how to use a standard roll of 35mm film in the
bulk load camera module.
You can expect to image about 28 frames on a 36 exposure roll of
film or 16 frames on a 24 exposure roll. For most efficient operation,
use full-length bulk rolls.
Loading a 35mm Cassette
Follow this procedure to load a 35mm cassette:
Step 1: Place the film cassette into the film cassette recess in the
camera body.
Step 2: Position the cassette so that the film exits at the eight o'clock
position.
Step 3: Thread the film along the same path you follow when load-
ing bulk rolls of film. See Figure 4. Follow the instructions in
the section Loading Film in this document.
Step 4: Make sure that the film makes contact with the out of film
switch.
12 • PCR II Plus 35mm Bulk Load Camera Module