Internal Termination
If you use SCSI communication, you need to terminate both ends of
the SCSI chain.
• The PCR II Plus contains an internal terminator that you can turn
on and off from the control panel.
• When the internal terminator is off, the PCR II Plus can be installed
anywhere on the SCSI chain to any host computer.
• When the PCR II Plus is installed at the end of a SCSI chain, the in-
ternal terminator must be on.
Follow this procedure to turn internal termination on or off:
Step 1: Press MENU once, then NEXT or PREVIOUS until the mes-
sage window displays either DISABLE SCSITERM (internal
SCSI terminator is on) or ENABLE SCSITERM (internal SCSI
terminator is off).
Step 2: Press SELECT. This changes the termination setting and the
message displayed in the message window.
Step 3: Press MENU to return to the ready menu.
2-10 • PCR II Plus User Guide
To Next Page
Loading...
