Agilent Technologies 7100 User Manual

58 Agilent 7100 Capillary Electrophoresis System User Manual
3 Installing the Instrument
Installing the Instrument
Connecting Cables
The Agilent CE instrument has the following connectors on the rear.
• All electrical connectors, such as line power, LAN connector or fuses, are
located on the right-hand side of the electronic box on the back of the
instrument.
• All connectors for liquids and external pressure supply are located on the
left-hand side of the electronic box.
1 Ensure that the line power switch on the front of the instrument is OFF.
2 Connect the following cables as shown in Table 2 and in Figure 2.
a One power cable
b LAN cable, which connects the Agilent CE instrument directly to the
computer with the Agilent ChemStation installed or to the local network.
For a description of remaining items refer to the Hardware section.
• For more information on cable connection to 3
rd
party detectors or analog
out, please refer to “Hardware Information” on page 171.

Agilent Technologies 7100 Specifications

General

Brand	Agilent Technologies
Model	7100
Category	Laboratory Equipment
Language	English