149
A Accessories and platepads
Installing and setting up a Nested Rack Insert
Bravo Platform User Guide
The Nested Rack Insert is approximately 5 mm taller than a standard platepad.
7 In the Profiles tab, click Update this profile.
8 To verify the setup, perform a tips-on task.
Related information
For information about... See...
Bravo Platform hardware components “Hardware overview” on page 5
Gripper y-axis offset “Verifying the gripper setup” on page 41
Editing teachpoints “Setting teachpoints” on page 34
Setting up labware definitions VWorks Automation Control Setup Guide
Using the accessory in a protocol VWorks Automation Control User Guide
To Next Page
Loading...
