2 Setting up the Bravo Platform
Configuring external robot access
52 Bravo Platform User Guide
3 In the Move Bravo to this safe location box, select the deck location number where
the Bravo head should move for the duration while the external robot is accessing
the Bravo deck.
Note: Location 5 is the default safe location.
4 In the Profiles tab, click Update this profile.
Allowing concurrent operations during external robot access
To prevent potential hardware collisions, ensure that you plan the external robot
access locations carefully. For guidelines, see “Planning the robot access locations”
on page 48.
To allow concurrent operation during external robot access:
1 In Bravo Diagnostics, click the Profiles tab and select the profile that you want to
update.
2 Click the External Robots tab.
3 Clear the Prevent Bravo operation during external robot access check box.
4 To configure a location for one or more robots, do the following:
a In the Deck location box, select the location number.
b In the Does an external robot access this location box, select Yes.
c In the External robot list, select the robot or robots that may access this
location.
To Next Page
Loading...
Need help?
General
