Getting Started 1
To Rack Mount the Instrument
U3606A User’s and Service Guide 7
To Rack Mount the Instrument
You can mount the U3606A in a standard 19- inch rack cabinet using one
of the three optional kits available. Instructions and mounting hardware
are included with each rack- mounting kit. Any Agilent Technologies
instrument of the same size can be rack- mounted beside the U3606A
Multimeter|DC Power Supply.
1 Remove the carrying handle and the front and rear rubber bumpers
before rack- mounting the instrument.
2 To remove the handle, rotate it to a vertical position and pull the ends
outward.
3 To remove the rubber bumpers, stretch a corner and slide it off.
4 To rack mount a single instrument, order adapter kit 34190A.
5 To rack mount two instruments side- by- side, order lock- link kit 34194A
and flange kit 34191A. Be sure to use the support rails inside the rack
cabinet.
To Next Page
Loading...
