Digital Multimeter Operation 2
Making Measurements
U3606A User’s and Service Guide 29
Performing current measurements
Making the connections
Connect the test leads as shown below:
Figure 2-2 Terminal connections for current measurements
• The U3606A will automatically select a suitable range for current
measurements by default (autoranging). To manually select a range,
see “Selecting a Range” on page 54 for more information.
• The U3606A resolution is set to 5½ digits by default. To change the
resolution, see “Setting the Resolution” on page 55 for more
information.
To Next Page
Loading...
Need help?
General
