2 Digital Multimeter Operation
Triggering the Multimeter
70 U3606A User’s and Service Guide
Front panel triggering
Single triggering
The U3606A takes one reading each time you press Trig.
Press Shift > Trig once to enable the single trigger mode.
The Trig annunciator is illuminated and the single trigger function is
enabled.
A single reading is taken, and another reading is taken each time you
press Trig. (You do not need to press Shift again.)
Press Shift > Trig again to exit the single trigger mode.
The single trigger mode is available from the local interface only.
To Next Page
Loading...
Need help?
General
