VIII U3606A User’s and Service Guide
In This Guide…
1 Getting Started
This chapter prepares the U3606A Multimeter|DC Power Supply for use, and contains a
brief description of the instrument front panel, display, keypad, terminals, and rear panel.
2 Digital Multimeter Operation
This chapter contains detailed information on how to take measurements using the
U3606A Multimeter|DC Power Supply. It also describes the various multimeter functions
and features available in the U3606A.
3 DC Power Supply Operation
This chapter contains examples on how to operate the DC power supply from the front
panel. The simple examples discussed in this chapter shows you how to program the
output voltage and current functions, the protection functions, and the additional source
functions.
4 System Related Operation
This chapter lists the various items and settings in the utility menu. This chapter also
describes how to store and recall an instrument state with the U3606A Multimeter|DC
Power Supply.
5 Verification and Performance Tests
This chapter contains the procedures for verification of the instrument performance. The
input connections and test setup for each verification procedure is also described in this
chapter.
6 Calibration Procedures
This chapter contains the procedures for the instrument adjustment (calibration). You must
first unsecure the instrument before any adjustment can be done. The steps to secure and
unsecure the instrument for calibration are also described in this chapter.
7 Disassembly and Repair
This chapter will help you troubleshoot a failing instrument. It also describes how to obtain
repair service and lists the replaceable assemblies.
To Next Page
Loading...
Need help?
General
